SUNLU S2 SKADIS wall mount

I couldn’t find a mount for the SUNLU Filadryer S2 that fits a standard IKEA SKÅDIS board and meets my expectations, so I designed my own. This orientation takes up less space than other alternatives, allows the lid to open easily, and makes filament changes more convenient. It also lets me print while drying at the same time. I’ve modified the fan orientation so it helps push air out of the dryer during operation, however, keeping the lid slightly open still provides the best drying performance. For this setup, you need to rotate the fan 180 degrees, with the vent side facing the same direction (see photo). If you prefer to keep the original airflow, simply install the fan as it is in the stock base. The whole process is very simple as the cables have a lot of slack, but remember You are doing it at your own risk! For the fan use the original screws provided with the dryer, while 2 main mounting screws need to be between 10-12mm in length. You can see the next iterations for the base