Sunset Meadow Hueforge

Wichtig! Da ich nur ein einfaches AMS benutze muss bei der Pause das schwarze Filament ins das weiße Filament aufgetauscht werden!!! Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 240x159.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 1 PLA BambuLab Basic Green Transmission Distance: 2.4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6.4 PLA BambuLab Basic Jade White Transmission Distance: 5.4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #14 (0.68mm) swap to Green At layer #20 (0.92mm) swap to Orange At layer #30 (1.32mm) swap to Yellow At layer #40 (1.72mm) swap to Jade White for the rest.