Thingiverse
Sunton 4.7" Touch Display Wall Mount
door pinball_newf
2
Downloads
1
Likes
0
Makes
A basic Sunton 4.7 Display Wallmount.
The top cover is friction fit @ 0.5mm from the mount, so your printer must be reasonably dialed in for this to work.
Use supports for the mount.
You will need to drill holes for mounting the display and screws for the wallmount tabs according to what size screws you have. The display is M3, or M4 if you want to drill out the PCB slightly [or 6/32" works as well].
The top cover is friction fit @ 0.5mm from the mount, so your printer must be reasonably dialed in for this to work.
Use supports for the mount.
You will need to drill holes for mounting the display and screws for the wallmount tabs according to what size screws you have. The display is M3, or M4 if you want to drill out the PCB slightly [or 6/32" works as well].
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!