Thingiverse
Suorin Air Plus Case
door xxsteven69xx
4
Downloads
5
Likes
0
Makes
Just bought a new vape and needed a cool case to go with!
The design was optimized for 0.2mm layer heights. The wall thickness is 2 perimeters at .45mm line width in prusa slicer which is 0.86mm thick. Stock charger fits and extra hole if you have a hard time removing from case you can push from bottom.
The picture is an old version. The difference is the notch was moved to the other side so the plastic doesn't touch your lip. The notch is there to help grip when you remove from case.
The design was optimized for 0.2mm layer heights. The wall thickness is 2 perimeters at .45mm line width in prusa slicer which is 0.86mm thick. Stock charger fits and extra hole if you have a hard time removing from case you can push from bottom.
The picture is an old version. The difference is the notch was moved to the other side so the plastic doesn't touch your lip. The notch is there to help grip when you remove from case.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
