Super BCAR Experimentation

Apparently the Akasha BCAR works really good. Whether it's the enormous porting, the inline PCAR, progressive crush, or all of the above, I've no idea. May as well mess around and see, so I drew up a few mock ups to test.BOM and Build Notes:BOM: F683ZZs and m3x10 flat head screws (but slightly longer/shorter or different heads work fine) like my past designs. Make sure the flanges face away from the screw head. Don't crank the screw in. Turn until you feel the resistance jump and stop so you don't mash the standoff flat or jam the outer race of the bearing into the print.Testing Other Parameters:Feel free to grab the source F3D from what I remixed and try your own parameters for the BCAR section (May require some wrestling with the CAD file). Messy F3D of one version included as a zip for people who know what they're doing (it breaks on a lot of inputs and will need reworking).If you just want to test a bunch of angle/crush combinations on a long BCAR, check out the