Slicer Discord
Super (Magnetic) Flexi Gecko – 3D printable model from MakerWorld MakerWorld
Animals

Super (Magnetic) Flexi Gecko

4.9k Downloads
1.3k Likes
3.6k Makes
Go to Model
Geckos are usually found on the wall, so I modified Martin Rigatoni's great model so that it can be fitted with two 8x3, 6x3 or 5x2 mm round magnets. Now you can attach it to any metal surface. If you are interested, I can also create versions for other magnet sizes, just let me know. Attention: the holes have zero tolerance, if the printer is well adjusted, the magnets should be able to be pressed into the holes with a little force and then hold without having to glue them. If the holes are too narrow you can heat the magnets a little bit (not too hot, otherwise they lose their magnetism!) and then press them carefully into the holes. Or alternatively you can scale the model up a bit (about 101%) and then fix the magnets with glue if necessary.
Category
Animals
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design · significant post-processing
Print-in-place Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection