Super Mario 3

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Orange PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #15 (1.28mm) swap to Orange At layer #21 (1.76mm) swap to Yellow At layer #26 (2.16mm) swap to Jade White for the rest. The Model is 150x200mm in size You need a different size: Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. You need an A1 Mini profile; if you are interested, simply send a message. You can find the matching Hueforge frame here. https://makerworld.com/en/models/2306996-picture-frame-150x200mm#profileId-2556629 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.64mm