Super Mario Hueforge

Super Mario, my favorite game character when I was a kid! Print Instruction:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm Filaments Used: #000000 PLA Black Transmission Distance: 0.1 #c00d1e PLA Basic Red Transmission Distance: 4 #fce300 PLA Basic Yellow Transmission Distance: 6 #ffffff PLA Basic Jade White Transmission Distance: 5 #0086d6 PLA Basic Cyan Transmission Distance: 2.4This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Yellow At layer #13 (1.12mm) swap to Jade White At layer #18 (1.52mm) swap to Cyan At layer #21 (1.76mm) swap to Jade White for the rest. For only one AMS,Start with 4 colors as follows:Slot1: BlackSlot2: RedSlot3: YellowSlot4: WhitePause was set at Layer #7 in the print fil