Super simple garden bed cover

These pieces allow you to build a garden bed cover using nothing but straight cut timber. No angles to worry about as the printed parts deal with all the complexity. It also includes a hinge so you can lift it from one side. This design uses: 42 x 22mm timber (I used treated pine) Some 8g x 25mm stitching screws A length of 14x4mm cable feeding tape Some netting Staples to hold the net in place https://www.bunnings.com.au/macsim-8g-x-25mm-stitch-button-screws-jar-200-pack_p0164925 https://www.bunnings.com.au/poly-eiger-4mm-3-6m-yellow-poly-cable-feeder_p4430566 Dimensions I used for each triangle end piece of a 600mm wide garden bed are 516mm length for the base and 457mm for the sides. Maths: If you want to scale up the design, then use For the base length of timber = Total width of garden bed - 84mm For the side pieces = (Total Width of garden bed * 0.86) - 59mm I printed in PETG.