Super60 Keyboard Case

Update 8.24.20 - Added Southpaw versions of case and bottom wedge.


The Super-60 is a case that combines a standard 60% keyboard PCB with the Cospad numberpad PCB. You will still need two cables to plug in each device, but otherwise, the case lets you use them as single unit.

Note this works for 60% boards with a standard mounting layout, such as the DZ60, GH60, Satan, etc. This will NOT work with the Anne Pro, as it does not use the standard mount locations.

Likewise, you must use the Cospad number pad PCB found on KPRepublic or AliExpress. you will need to score the pcb along the perforations above the bottom row, and then break off that piece. you will probably need to reprogram the cospad to adjust to the new layout. You can do this on QMK configurator - config.qmk.fm. Choose the ortho layout, and move everything up a row.

For the inserts, use M2 x 3mm brass inserts and press them in the holes with a soldering iron. likewise, you will need M2 x 4mm screws to hold