Supergirl

Supergirl in explosive action. One of my favorite characters and TV shows. This print uses 5 colours so pick the number 1 or 2 slot on the AMS for the fifth colour and swap it out after using the first colour in that slot.Project: supergirl.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x113.3mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kexcelled Lake Blue Transmission Distance: 3.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Lake Blue At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Yellow At layer #14 (1.2mm) swap to White for the rest.