Superman #10 - Hueforge Comic Cover

Superman #10 Comic book cover made in hueforge. Colours could be a bit more accurate but this is from before i had a TD-1 so my filaments were not the best. Original comic cover artist - Jamal Campbell. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 153.12x235.19mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 3.9 PLA ATA Generic Orange Transmission Distance: 3.3 PLA PolyTerra Pastel Peach Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #10 (0.88mm) swap to Orange At layer #12 (1.04mm) swap to Pastel Peach At layer #17 (1.44mm) swap to White for the rest.