Superman - Hueforge

Superman hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE THE Z HEIGHT Filaments Used: PLA Kingroon Black Transmission Distance: 0.1 PLA Kingroon red Transmission Distance: 5.6 PLA Kingroon white Transmission Distance: 5.4 PLA kingroon yellow Transmission Distance: 5.8 PLA Bambu Silk + Blue Transmission Distance: 0.1 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to red At layer #14 (1.2mm) swap to white At layer #17 (1.44mm) swap to yellow At layer #18 (1.52mm) swap to white At layer #19 (1.6mm) swap to Blue At layer #28 (2.32mm) swap to white for the rest.