Superman HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #13 (1.12mm) swap to GrayAt layer #20 (1.68mm) swap to Jade White for the rest. The frame used in this picture is a creation of my own, using very little filament and a super quick print. Will hang on wall or can stand up with the stand. Easy to switch from wall to desk at any time.Link to All-in-One frame:https://makerworld.com/en/models/823744#profileId-767187 Boost MeIf you like my models and want to support me, please consider