Superman Logo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.06x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA Smart Recycled Dark Blue Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4This print uses 2 unique filaments Swap Instructions: Start with Dark Blue At layer #7 (0.64mm) swap to Red for the rest.