Thingiverse
Support battery tyro 89
von KevinBou
0
Downloads
0
Likes
0
Makes
Support battery for eachine tyro 89
Dimension was made with 550mAh 3S 70C MINISTAR HV (23.5X17X69mm)
https://www.drone-fpv-racer.com/cnhl-550mah-3s-70c-ministar-hv-6840.html
You just will need
- elastic
To assembly it, remove the three nuts which support the canopy with the frame and screw them directly in the support.
Dimension was made with 550mAh 3S 70C MINISTAR HV (23.5X17X69mm)
https://www.drone-fpv-racer.com/cnhl-550mah-3s-70c-ministar-hv-6840.html
You just will need
- elastic
To assembly it, remove the three nuts which support the canopy with the frame and screw them directly in the support.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!