Support Ladder

Used to add support for tall thin prints. Example: Lithophane Place upright on bed so that the rungs intersect with the model that you need to support / stabilize. You can cut the rungs if they are to long. The rungs are 1mm thick so will need to be cut off the completed model. Done with good quality flush cutters show little to no imperfection on the part. Height should also be cut as needed. Fusion 360 file available to make needed changes. Idea from Slant 3d youtube channel. recommended print settings Object specific print settings2 walls infill of choicezero top layers to save time/filament