Thingiverse
SupraDrive 500XP LED Support
par elpiotr
0
Téléchargements
1
Likes
0
Makes
This is an LED support for the Amiga SupraDrive 500XP. It's designed to be printed with TPU and I strongly recommend using this material. It provides some flexibility and fits securely on the LED sockets.
I'm attaching the Fusion360 project so feel free to adjust it to your needs.
Two important things:
1. There is a termination resistor near the LED sockets. On my unit, it was already bent toward the memory sockets away from LEDs, so I had no issues inserting the support (see the attached photo). If yours is straight (or bent toward the LED sockets), you may need to carefully bend it manually toward the memory sockets. But please do this with caution!
2. The support has one wall thinner than the other. The thinner goes between the terminator/memory and the LED sockets.
I'm attaching the Fusion360 project so feel free to adjust it to your needs.
Two important things:
1. There is a termination resistor near the LED sockets. On my unit, it was already bent toward the memory sockets away from LEDs, so I had no issues inserting the support (see the attached photo). If yours is straight (or bent toward the LED sockets), you may need to carefully bend it manually toward the memory sockets. But please do this with caution!
2. The support has one wall thinner than the other. The thinner goes between the terminator/memory and the LED sockets.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !