Slicer Discord
SV06 Front Camera Mount – 3D-Druckmodell von MakerWorld MakerWorld
3D Printer Accessories

SV06 Front Camera Mount

35 Downloads
6 Likes
1 Makes
Zum Modell
This is my front-centered camera mount for the Sovol SV06. The main goal was to get my camera mounted directly in front of the print bed, and achieve some rigidity that I wasn't able to find with other published mounts. There is plenty of clearance for the bed to achieve full movement. Installs in less than a minute. Requires (4) M4x16 screws to mount it to the front of the printer and (2) M3x8 screws to assemble the top bracket onto the base. The M4x16 screws replace stock shorter screws in the front. I used the shortest screw from https://www.printables.com/model/224286-camera-webcam-screw-14-20-unc/files to attach my camera. Top bracket should be printed upside down. Both pieces print easy with any settings, no supports required. Please leave a like for my first published model :)
Kategorie
3D Printer Accessories
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen