Swan HueForge Bookmark

HueForge settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x126.47mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Beige At layer #20 (1.68mm) swap to Jade White for the rest.