Swapmod Supertack Protection

Explanation why to use:Swapmod will leave scratches on the unused side of the Supertack plate (photo 3)This model protects it by printing a 0.12mm layer on this unused sideIt lowers the magnetic power very slightly to ease the force the lever needs to use to eject it !! IMPORTANT !!Print WITHOUT the hook attached!To ensure it will print extra smooth, it should be printed at 60-70% flowrate!This model is only needed for Supertack plate, as textured PEI does not have this problemFlow rate calibration at the start of the print makes the layer smoother Notice for PETG farm printingThis profile was tested by me I printed the layer in PLA for PLA printing >50 cycles without problems @striding_wombat tested this profile for PETG printingThe PLA layer becomes tacky and might be better printed in PETG instead of PLAthe flowrate of 70% was to low for this user, the standard 0.12mm profile fixed this