MakerWorld
Test Models
Voir le modèle
Swatch Display Ferris Wheel
1.2k
Téléchargements
1.2k
Likes
677
Makes
I saw many swatch displays that lay flat, and I thought they were a bit boring, so I challenged myself to make a vertical swatch display! This clever swatch display is aesthetically pleasing and very fun to play with. Bearing recommended - (but not required): Don't have the required bearing? Tell me which one you have in the comments, and I will make one! In the 3mf, there is a separate plate that contains a stand that doesn't need a bearing. I recommend using a bearing as it makes the spinning experience smoother. I used a 6803-2RS bearing, link here: https://www.amazon.com/dp/B0C74XCGHP?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 Assembly Instructions: Place bearing down on a flat table Press wheel into bearing. It should be a tight fit. Make sure the wheel lays flat with the bearing. Place the stand on the table and press the wheel with bearing into the stand. Make sure to leave a bit of space in between the stand and wheel. <img src="https://makerworld.bblmw.com/make
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !