Slicer Discord
Swatch Truck – Modelo 3D imprimible de MakerWorld MakerWorld
Test Models

Swatch Truck

60 Descargas
14 Likes
79 Makes
Ver Modelo
Introducing the Swatch Truck! This was created for the Printables “Filament Sample Swatches” competition. Designed in onshape, my goal was to create a fast, easy to print model that could test a variety of useful features in a short amount of time (~30 minutes) and use minimal filament (less than 10g). There is space on the back to write the filament brand/colorUpdate: I added a 3mf file with separate parts to test multi color extruders!Print settings: 0.2mm layers, 40%+ grid type infill, 40mm/s surface speed.Here are the features:Flow test: Using a surface flow method, the large flat surfaces can help calibrate your extrusion multiple in the slicer. To test, set the top layers to around 10 (assuming 0.2mm layers, make sure there are at least 2 layers of infill), 40%+ infill (a grid type works best), and a top layer line with equal to the nozzle size (0.4mm for a 0.4mm nozzle etc). The finish should be smooth to the touch with no visible gaps between the lines. Note that the extruder e
Categoría
Test Models
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Confianza media
¿Por qué?
2 colores · capas de 0.20mm
Pieza única 2 colores / AMS
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
Colores
2 (AMS/MMU recomendado)
Altura de capa
0.2 mm
Postprocesado
Lijado
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

ZombieHedgehog también publica en

9 modelos adicionales en 2 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

3 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección