Switch 2 Active Cooling System

SWITCH 2 BASE COOLING SYSTEM Rev_01 Update:This design imporoves on the following areas compared to the Rev_00 model:Improved design made more minimalist and modern30% less materialImproved airflow for better coolingImproved noise reduction--- As many know the Switch 2 gets pretty hot during intense gaming sessions while docked.This cooling system is designed to avoid battery degradation due to high temperature exposure.The air temperature coming out of the top exhaust of the console dropped from 48°C to 40°C (Measurements done with 25°C room temperature - Cooling performance may vary based on the PC fan model used). What you will need to install the mod:3D printed partsStandard 120mm PC Fan220V to 12V wall voltage converter to power the fanORA 5V to USB 3-pin/4-pin fan adapter to power the fan directly from the switch 3 dock's USB ports(Optional but recommended ) Smart plugFor the voltage converter I've used an old flip phone charger but you can use everything that has a power