Switch and Connector Box

Dual Rocker Switch Box with JST-Connectors

Inspired by this box https://www.thingiverse.com/thing:2806903 and this connector hub https://www.thingiverse.com/thing:1487009 i created a Switch Box, which can be mounted on the lower left side of my Mega-S.

The connectors from bottom to top:
+ 1) connected to the spare 12V of the PSU of my printer.
I placed the cable more or less hidden under the printer and so on.
+ 2) Directly connected (continuos power) i use for my OctoPi
+ 3) and 4) Switched with the two rocker switches eg for LED stripes on the frame and LED-Lightning at the hot end.

Look at circuit.jpg (Sorry for the bad quality, i do not have a program for creating circuit diagrams)

I soldered all red respectively black ends together, two on each side, and put a heat shrink tubing over the soldered area.

**Getting the 12V to the Box**
Just remove the screws which are holding the bottom plate and two stands, then you can remove the bottom plate without removing th