Switch Plug - Jumper T16 Pro
par Danimal_3D
16
Téléchargements
10
Likes
1
Makes
Removed switches E & G from the Jumper T16 (see my youtube channel for overview) and pressed in these plugs.
Print with TPU
They will be a VERY VERY tight fit -- likly need to push on it with tweezers/ pliers to get it started and press firmly in place.
FYI - There is a "notch" on one side. The radio has a flat spot on the inside that this flat notch will fit into.
Print with TPU
They will be a VERY VERY tight fit -- likly need to push on it with tweezers/ pliers to get it started and press firmly in place.
FYI - There is a "notch" on one side. The radio has a flat spot on the inside that this flat notch will fit into.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
