Switchback Pro Micro HDZero Camera Mount

Designed this to fit a micro sized (19x19mm) camera into the Switchback Pro, which is only designed for nano sized cameras (14x14mm). Idea is to replace the front standoffs with a TPU 3d print that is wide enough for the camera.

This design has not been crash tested - use at your own risk!

Design requires 30mm standoffs to fit the HDZero / Shark Byte VTX-S whoop board on top of the stack. Stack screws must be cut down to 22mm for clearance.

Mount the VTX-S with this 20x20 to 25.5x25.5 adapter:
https://www.thingiverse.com/thing:4841090

CAD files are here:
https://cad.onshape.com/documents/168ed121aa89278550d2515f/w/21848c62f49ec3b28f6a0d44/e/0013a89ae3c5f61499a98a00?configuration=List_dKRuWe3BZBmdrs%3DDefault