Thingiverse
Switchback Pro Shark Byte Top Plate
di Leadtech5
5
Download
2
Likes
0
Makes
Wanted to put the Shark Byte TX5S.1 in the Five33 Switchback Pro.. So I did.
Pictured is my proof of concept top-plate. The files have cutouts like the OEM top plate so most accessories should fit the same.
- This is cut from 2mm carbon sheet
- Stack screws must be cut or replaced with 20mm screws (tip to tail)!
- The board is held to the top plate by m2x7mm motor screws, m2 nuts, and 2-3mm gummies.
- The 40mm MIPI Cable would be best -> https://www.hd-zero.com/product-page/standard-mipi-digital-video-interface-40mm-20p-cablb
Update 1 (v2): Reoriented object in DXF file
Update 2 (v6): Centered TX5S.1 board with FC stack
Update 3 (v7): Added PDF and STEP files
Pictured is my proof of concept top-plate. The files have cutouts like the OEM top plate so most accessories should fit the same.
- This is cut from 2mm carbon sheet
- Stack screws must be cut or replaced with 20mm screws (tip to tail)!
- The board is held to the top plate by m2x7mm motor screws, m2 nuts, and 2-3mm gummies.
- The 40mm MIPI Cable would be best -> https://www.hd-zero.com/product-page/standard-mipi-digital-video-interface-40mm-20p-cablb
Update 1 (v2): Reoriented object in DXF file
Update 2 (v6): Centered TX5S.1 board with FC stack
Update 3 (v7): Added PDF and STEP files
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!