Sylvester the Cat

Sylvester James Pussycat, Sr. is a fictional character, an anthropomorphic tuxedo cat in the Looney Tunes and Merrie Melodies series of cartoons. Sylvester appeared in 103 cartoons and most of his appearances have him often chasing Tweety, Speedy Gonzales, or Hippety Hopper.  Three of his cartoons won Academy Awards, the most for any starring Looney Tunes character.  Sylvester's trademark exclamation is "Sufferin' succotash!" No supports are required.   One piece contains built-in supports, an optional part without the built-in supports is also supplied if you want to use your slicer supports.  If you have the proper filament colors, no painting is needed. The assembled model is 200mm tall. Enjoy! ........................................................................................................... **Print Instructions:**Supports: NoResolution: .2mmInfill: 10% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... **Building the model** Colors Black: (Paramount3D PLA - Black)body_blackbody_black_without_supports (optional piece without built-in supports)eye_blacks (contains two identical pieces)whiskers_right (contains two identical pieces)whiskers_left (contains two identical pieces)foot_pad_leftfoot_pad_right.. Red: (Hachbox PLA - True Red)mouthnose.. White: (Overture PLA - White)eye_white_lefteye_white_righttail_whitebody_whitehand_lefthand_rightfoot_leftfoot_rightear_leftear_righthair_back_lefthair_back_right.. Pearl: (Protoparadigm PLA, out of business - White Pearl)claws_hands (contains eight identical pieces)claws_feet (contains six identical pieces).. Pink: (Paramount3D PLA - Harajuku Pink)tongue ........................................................................................................... **Printing and assembly tips** Printing tips1 - No supports are required.   2 - There are some pieces that may nee