Thingiverse
symsmoothercase
par Schnabulator
3
Téléchargements
3
Likes
0
Makes
It is a case that holds four tl smoothers.
You can clip two tl smoothers in one half of this thing and then...
flip both halfs together and place it somewhere near your motherboard.
In case you want to mount this thing, expand and screw it with the
optional distances and M3 x 12 screws at the desired place.
Normally you need to print
2 x symsmoothercase
Dimensions:
tl-smoothers: 28 mm x 49 mm x 1.5 mm
complete thing: 72.5 mm x 53,5 mm x 23 mm
expanded thing: 134 mm x 53,5 mm x 13,5 mm
tl-smoother brand:
trianglelab.org TL-Smoother plus
Please notice: The smoothers can get really hot, dont use PLA. Pay attention in what
you are going to do. I could not be responsible if you burn your HOME.
Have fun with this design from me for you.
Greetings Schnabulator
You can clip two tl smoothers in one half of this thing and then...
flip both halfs together and place it somewhere near your motherboard.
In case you want to mount this thing, expand and screw it with the
optional distances and M3 x 12 screws at the desired place.
Normally you need to print
2 x symsmoothercase
Dimensions:
tl-smoothers: 28 mm x 49 mm x 1.5 mm
complete thing: 72.5 mm x 53,5 mm x 23 mm
expanded thing: 134 mm x 53,5 mm x 13,5 mm
tl-smoother brand:
trianglelab.org TL-Smoother plus
Please notice: The smoothers can get really hot, dont use PLA. Pay attention in what
you are going to do. I could not be responsible if you burn your HOME.
Have fun with this design from me for you.
Greetings Schnabulator
Schnabulator publie également sur
2 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
