T-Rex ( Hueforge )

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA Protopasta Soda Green Transmission Distance: 16PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Yellow Transmission Distance: 6Swap Instructions:Start with Charcoal BlackAt layer #8 (0.72mm) swap to Soda GreenAt layer #11 (0.96mm) swap to BrownAt layer #15 (1.28mm) swap to Yellow for the rest.