T-Rex Hueforge

Tyrannosaurus Rex If you resize the model make sure you do not scale the Z axis or the print colors will not be in the same position Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #14 (1.2mm) swap to Beige At layer #22 (1.84mm) swap to Jade White for the rest.