T-Rex HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #a4452e PLA BambuLab Basic Brown Transmission Distance: 2 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Brown At layer #9 (0.8mm) swap to Blue Gray At layer #11 (0.96mm) swap to Mis