t-slot hinge

I needed hinges for the door of my Eustathios V2. So I used rohingosling's hinge generator and made the center of rotation as close to the frame as possible so that the door will be flush against the frame.

This is for a door that's 0.92" thick and needs a separate 2mm pin


hinge_width = 60.0;
leaf_height = 60.0;
component_clearance = 0.4;
knuckle_count = 7;
enable_auto_pin_size = 0;
// Manual pin diameter setting. Only has effect, if "Enable Auto Pin Size" is set to "No".
pin_diameter = 2.5;