T8 backlash

The Z axis was creating small layer thickness blemishes.

This is a remix and mod of
Backlash eliminating T8 Lead Screw
https://www.thingiverse.com/thing:1808428
I printed 4 parts at 100% size in ABS for use in an elevated temperature chamber, excellent T8 fit.

You need to mod the lower part of the set.
1. Drilled out the internal T8 threads
2. Drill the mounting holes larger to slip over the mounting bolt heads which stops the lower printed part from rotating (3rd pic)
3. Drill or countersink the mounting base to fit around the upper edge of the existing brass T8 nut if it sticks up like mine (2nd pic right most part)
4. I also snipped the holes in to slots but it is not required

The spring is formed from 16 turns (not critical) of 0.045" SS welding wire. Coat hanger wire might also work. I make springs by tightly wrapping the wire around a rod or twist drill shank to establish internal diameter and then stretch the turns apart to the desired length. This wire yields a