Table Clamp Spool Holder

I designed this table mount spool holder to work with the bowden style upgrade on my A8 printer. Should work for pretty much any feeder system.

Print two of the M24 bolts and one of every other item.

Orient the arms so they lay flat in the slicer program. All other items should be pointing up. Supports are not necessary.

I've designed it so that you can use the M16 all thread rod to connect the two arms for stability. I also included an M8 threaded hole so that you could also use the metal rods that come with many printer models.

The included spindle fits nicely in the notches. Leave about a 10mm gap between the arm brackets, or slightly longer if you want the spindle to fit looser. I also included a V-notch for use with an M8 threaded rod in place of the supplied spindle. If using an M8 threaded rod to mount your spool, you can swap the brackets around if needed.

The supplied M24 bolts will allow you to clamp to a table edge from 20 to 30mm thick. Feel free to r