Table Tennis Bat

DescriptionThis is a bat/racket for playing table tennis (pingpong). Dimensions are accurate.Print Instructions:If you do not want to use the pre-modified Bambustudio files, you can set the settings yourself:If you have some TPU or similar handy - Option 1:Print settings for bat:Set default Layerheight to 0.3mm in you printing profiledisable top & bottom layers (value=0)Set default Infill to 30% Cubic (gives enough rigidity and saves filament+weight)Use height modifier for the following highlighted settings:0.00-0.40mm → 0.2mm Layerheight & 60% Infill → Print in TPUAdd a colorchange at 0.70mm to switch from TPU to PETG after the first two layers0.40-1.00mm → 0.3mm Layerheight & 100% Infill → Print in PETG from hereFrom here the printer will print with the 0.30mm layerheight and 30% infill as you set as default earlier5.80-6.40mm → 0.3mm Layerheight & 100% InfillAdd a colorchange at 6.60mm to switch back to TPU6.40-6.80mm → 0.2mm Layerheight & 60% Infill → Print in TPUPrinting the top a