Tablet Holder CFMOTO 450MT

This tablet mount was designed specifically for the CFMOTO 450MT and fits the Samsung Galaxy Tab Active3 (8"). It provides a stable and secure mounting solution for using your tablet as a navigation or control device on the motorcycle. The Mount Privides 2 Orientations, one for sitting and one for standing. The orientation can be switched while riding.  The design is intended to withstand vibrations and impacts typically encountered during off-road riding. For additional security, the mount requires a separate lock, which is integrated into the design. The compatible lock is linked in the model description. Lock: https://www.amazon.de/dp/B0D1CKTXC4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 To ensure sufficient strength and durability, the mount should be printed using robust materials and appropriate print settings. Recommended print settings Material: PETG or ASA Wall lines: 6 Infill: 60% Print orientation: choose an orientation that aligns layer lines with the primary load direction These settings help maximize structural strength and improve resistance to vibration, sunlight, and mechanical stress during motorcycle use. Assembly / Installation To install the mount, replace the upper bolts with M5×20 mm screws with washers. The original display screws can be loosened from the front using a 10 mm socket. After loosening them, carefully slide the tablet mount between the display unit and the motorcycle frame. Once positioned correctly, tighten the screws to secure the mount in place. Ensure all bolts are tightened properly before riding. Hardware List 12× M5 × 12 mm screws 2× M5 × 20 mm screws 10× M5 self-locking nuts (nylock) 4× compression spring – Ø 9.5 mm or smaller, length 20 mm 2× M5 washers 1× M4 × 10 mm pan head screw