Tablet/phone stand

Design ConceptThis tablet/phone stand is designed with simplicity and functionality in mind. The sleek, stylishfinish gives it a modern look with an accent trim for a pop of colour.PurposeThe stand is meant to hold tablets or phones securely in place, allowing for easy viewing and hands-free use. Its angle is ergonomically friendly for prolonged use.Printing SuggestionsPrint with PLA for quick and easy printing. Use normal support for Mounting plate only. All other parts do not require support. For this model I reduced the top layer speed to achieve a nice clean finish on any large flat surfaces (60mm/s)Assembly InstructionsThe product requires very little assembly and is easy to put together. The Mounting plate simply slides onto the sliding dovetail. The sliding dovetail has a high tolerance for a secure fit and may need to either lightly sand the flat surface of the male half or slide them together until resistance is felt, remove and repeat the process until it slides smoothly.The accent ring can simply be slotted into its groove to be removable if you fancy a change of colour, or using some adhesive for a more secure fit.Additional InfoThe Base model has recesses (support not necessary) on the underside for location of silicone anti slip pads (10x3mm). These are not a necessity, however they do add to the overall finish, provide surface protection and prevent stand from sliding.https://a.aliexpress.com/_Ez4i6EeI have provided this link for convenience as an example of what silicone pads are used. It is not associated with Creality in any way. I have no affiliation to the link or anyone associated with the link, nor do I gain financially or any other way not mentioned.