TALJE02 - Modular Table Lamp

Modular Table Lamp is a 3D printed table lamp compatible with a standard E14 socket.The parts connect using snap-fit joints and allow downward lighting with partial upward light diffusion.Technical SpecificationsRecommended layer height: 0.2 mmInfill percentage: 15%Supports: Not requiredPrinting/Assembly InstructionsPrint all parts in the provided orientation.Insert the E14 socket into the designated housing.Secure the socket using the retaining ring included in the cord kit.Route the electrical cord through the base opening.Assemble the printed parts by pressing them together until the snap-fit joints engage.Install an E14 bulb.The lamp is composed of multiple separate parts, allowing different filament colors to be combined if desired, similar to the ceiling variant. In the current configuration, the lamp directs light downward and partially upward for heat dissipation.For single-direction lighting (downward only), place the optional top disc onto the upper opening to reduce upward l