Tandy 1000HX Gotek

## Tandy 1000HX floppy mount for Gotek floppy emulator board.

This project will require various modifications to the Gotek including soldering:

### Parts:
* Gotek floppy emulator compatible with FlashFloppy firmware.
* 2x identical OLED 0.91" 128x32 screens.
* 7x 2.5mm self-tapping screws.
* Amber or yellow 3mm led.
* USB flash drive, most should fit but best if it’s flat or micro-sized.
* Black electrical tape.
* You will need to do some custom wiring and soldering.

### 3D Print notes:
* Print front face, facing down.
* Prints without any supports and can use low in-fill.
* BuildTak-like build surface make a good matching texture for front face to Tandy plastic.
* Buttons may require some sanding to fit well.
* Platform STL includes a small standoff for mounting in drive bay A or B.
* USB Surround STL should be printed in black or painted black.
* Wedge can be used to lift the rear of the platform to help align front face up and down.

### Gotek modifications: