Tanjiro Hueforge Hexagone

Voici Tanjiro pour pouvoir vous faire une superbe déco murale ;) d'autre modèle suivront donc hésitez pas à revenir voir. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x166.61mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5.6 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White for the rest.