Tank

I started by changing the material to 1060 Alloy and selecting the front plane. I then created a sketch of half of a polygon. Then dimensioned it and offset it all 4mm. I then extruded the sketch to the centerline. I opened the bottom sketch and created the bottom of the tank and did the exact same thing for the top sketch. I then used the slot tool and created the top hole of the tank then selected the circular pattern and created 4 holes. Then I selected the fillet tool and filleted the 2 corners of the handle of the tank to 30mm. Mass = 8479.50 grams Volume = 3140555.01 cubic millimeters Surface area = 1610852.96 square millimeters