Thingiverse
Tank Cradle/Holder
by jmckeown2
38
Downloads
18
Likes
0
Makes
Cradle to keep a CO2 tank from rolling around in the back of the car on the way to the fill/exchange shop. Also good for spare tank storage.
STLs provided for 5 & 10 lb. tanks. - I've used the one for my 5 lb. tank, but don't actually own a 10, so please comment if you print one and it works. A 15 lb. tank is apparently the same diameter as a 10 lb. tank, so it *should* work there too but maybe use 2 of them.
Also, don't forget hot car interiors can soften PLA so stick to ABS or PET if you're going to leave it in the car. Also, leaving a pressurized tank in a hot car is also not a "genius move" either.
STLs provided for 5 & 10 lb. tanks. - I've used the one for my 5 lb. tank, but don't actually own a 10, so please comment if you print one and it works. A 15 lb. tank is apparently the same diameter as a 10 lb. tank, so it *should* work there too but maybe use 2 of them.
Also, don't forget hot car interiors can soften PLA so stick to ABS or PET if you're going to leave it in the car. Also, leaving a pressurized tank in a hot car is also not a "genius move" either.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!