Thingiverse

Tape Dispenser

by sameenkarim

90 Downloads

79 Likes

1 Makes

A tape dispenser made for a spool of garden tape

Reel min inner diameter: 38 mm
Reel max outer diameter: 99 mm

Printed without supports on an Ender 3 Pro
Took approx 6 hours to print at 0.2 mm resolution with 20% infill

You may need to use a knife/file to sharpen the teeth after printing

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

6 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Tape Dispenser need supports when printing?

No supports needed for Tape Dispenser — it's designed to print clean off the bed.

How long does it take to print Tape Dispenser?

According to the design notes, Tape Dispenser takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Tape Dispenser available in?

Tape Dispenser is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Tape Dispenser free to download?

Yes, Tape Dispenser is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Tape Dispenser

Similar Models

Add to Collection