Thingiverse

Tape Measure Spool

by DemonicPig

18 Downloads

14 Likes

0 Makes

A simple tape measure spool holder

Prints with no support in about 2 hours

easy to assemble

**UPDATE** Pin_V2_Flush is flush with the housing on the small end, it's a better fit than the regular v2

**UPDATE 2** Added alternate pin style with finger crank for faster winding

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Tape Measure Spool need supports when printing?

No supports needed for Tape Measure Spool — it's designed to print clean off the bed.

How long does it take to print Tape Measure Spool?

According to the design notes, Tape Measure Spool takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Tape Measure Spool available in?

Tape Measure Spool is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Tape Measure Spool free to download?

Yes, Tape Measure Spool is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Tape Measure Spool

Similar Models

Add to Collection