Tapo C210 Security Camera Ivar Mount

This is a screw-less, tool-free mounting solution to put any Tapo security camera with the round mounting plate (e.g. the C210) to the front edge of the vertical piece of an IKEA IVAR shelf. It works by plugging the back panel into 4 plug holes and then slide in the main piece into the grooves on the back panel. The back panel has an integrated stop, so the installation is quick, easy and should not damage anything as well as should be more or less fool-proof.I printed it in PLA+, as that's the only white filament I had, which has enough flex to be bent open to get the front piece onto the shelf. PETG would probably be easier to install, because of the extra flex. The camera can either be mounted on top or below the plate by inverting it. Just screw the original mounting plate onto the outer side of the mounting platform using 2 M4 button head screws of about 16mm length and fasten them with washers and nuts. Then attach the camera. I used long grooves as mounting holes, so you can