TAPO C560WS Corner bracket

I wanted to mount my Tapo C560WS to the corners of my house. The provided jig gave a big blindspot so I made a bracket to mount in in a 45 degree angle on the corner. The bracket fits perfectly, you might need longer screws, 5x45mm works okay. Pre drilling the holes will work better. There is a little hole in the middle, use it to mount the bracket to the corner before you mount the camera to the bracket so you don't need 3 hands. I used a 3.5x25mm screw. Cables can still be routed the same way. Mine is hanging in -10 degree celcius in Sweden, the PLA is keeping up. PETG is a better choice but I had no white ;)