Slicer Discord
Tapo C560WS Corner Mount – 3D-Druckmodell von MakerWorld MakerWorld
Electronics

Tapo C560WS Corner Mount

27 Downloads
4 Likes
10 Makes
Zum Modell
This is a corner mount for a Tapo C560WS outside security camera. These cameras are wired, but can be used with a long extension cable for the 12v power supply, together with Wi-Fi for the video. This allows for full 24/7 live view and recording. I use mine with a powered extension cable around the corner of my garage door. If you are using in combination with standard-sized UK house bricks, then the design allows for avoiding having to drill into very hard bricks (like mine) by spacing the screw holes into the mortar above and below the bricks. See this link for a compatible power extension cable …https://www.amazon.co.uk/dp/B07M6XS8WT If you using Wi-Fi (rather than a wired ethernet cable) then the included ethernet cap (together with the washer in the supplied connector) can be used to seal the network cable of the camera. I used white PET-G for outside strength and colour-match with the camera.
Kategorie
Electronics
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen