Taranis X9D Tablet Mount

I had an old Samsung 8" tablet I wanted to use to watch my birds fly. So, this is my design. Pretty simple. Back of tablet Center Mount will accommodate a Eachine 5.8Ghz receiver. Just use Zip ties to hold it in place. You will need a right angle USB connector to make it all fit nicely.

Hardwanre:

(4) ea. M3x12mm Socket Head Screws with Nyloc Nuts (Tablet Arms to Tablet Center Mount),
(2) M5x50mm Socket Head Screws with Nyloc Nuts (Tablet Center Mount to Knuckle and Knuckle to Center Arm)
(4) ea. M3x10mm Socket Head Screws (Center Arm to Long Distance Antenna Cover on X9D.

4" Zip Ties

Printed Parts:
(2) Tablet Arms
(1) Tablet Center Mount
(1) Knuckle
(1) Center Arm

You will need to use the center arm as a template to drill holes into the X9D Long Distance Cover. I used 3mm Drill Bit for a snug fit.

Assemble per pictures. Not much instruction needed. Since pictures, I have Zip tied the Center arm to the bar handle on the radio for added rigidity.

Hope